Leaded Bronze Lb1 Bolts Specification
The raw material of these fasteners is classified as Non-Ferrous Alloys. Being a PED certified Fasteners Manufacturer by TUV Rheinland,our fasteners are accompanied with EN 10204 3.1/3.2 certification. Leaded Bronze LB1 Bolts are available in hot forged,cold forged and bar stock machined conditions depending upon the order quantity.
Leaded Bronze Lb1 Also Known As Cusn7pb15-c . Lb1 Will Bear Moderate Loading, Moderate To High Sliding Velocities. It Can Bear Indifferent Lubrication And Dust Or Grit. Has Good Embed Ability. Minimum Shaft Hardness Hb 150.tolerant Of Water Lubrication. This Is Used In Steel Backed Automotive And Aero Engine Bushes Which May Suffer From Poor Lubrication.