Leaded Bronze Lb4 Washers Specification

Leaded Bronze LB4 Washers manufactured at TorqBolt are wear resistant,with high hardness and strength.

Dimensional standards as per DIN 125,ISO 7089,ISO 7090,ISO 7092,DIN 433,DIN 7349,DIN 9021,ISO 7093, are provided.

The raw material of these fasteners is classified as Non-Ferrous Alloys. Being a PED certified Fasteners Manufacturer by TUV Rheinland,our fasteners are accompanied with EN 10204 3.1/3.2 certification. Leaded Bronze LB4 Washers are available in hot forged,cold forged and bar stock machined conditions depending upon the order quantity.

Leaded Bronze Lb4 Also Known As Cusn5pb9 . Lb4 Can Bear Moderate Loading, Moderate To High Sliding Velocities And Indifferent Lubrication And Dust Or Grit. Has Good Embed Ability. Minimum Shaft Hardness Hb 200 . This Is Used In Bearings Requiring High To Medium Speeds But Light Loads. Bronze Backing For Babbitt Lined Automotive Bearings. .

Leaded Bronze LB4 Equivalent Designation

UNS DesignationBritish STDWerkstoff No.European STD
C93500Lb4Cusn5znpb

Leave a Reply