Inconel Washers Specification

Inconel Washers are nickel alloy fasteners with base of austenitic chromium and nickel also known by the trade name Nickel-Chromium Alloys. It has high corrosion resistance to acids and alkalis with high mechanical properties and ductility subjected to high pressure and heats both.
Inconel Washers are difficult to machine and hot roll threading is done to ensure 100% thread strength. It forms a passivation oxide layer once heated and hence used at wide range of elevated temperatures.

Applications: Inconel Washers are used for high-pressure vessels, heat exchangers, nuclear reactors etc.

Nickel 200 Washers

Nickel 200 is commercially unadulterated (99.6%) fashioned Nickel with best of the mechanical properties and resistance to a range of corrosive media. It has Good thermal, electrical and magnetostrictive properties. Used for variety of processing equipment. Especially to retain product purity in handling foods, Synthetic fibres and alkali’s.

Nickel 201 Washers

Nickel 201 is commercially unadulterated (99.6%) fashioned Nickel almost similar to Nickel 200 with lower carbon content to resist embrittlement by intergranular carbon at temperatures over 600 degrees F (315 degrees F) its Lower carbon content reduces hardness, making it more suitable for cold farmed items or applications.

Inconel 600 Washers

Inconel Alloy 600 is a Nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking, corrosion by high purity water and caustic corrosion. Its outstanding properties makes it useful for furnace components, chemical and food processing, nuclear engineering and sparking electrodes.

Inconel 601 Washers

Inconel Alloy 601 is a Nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking, corrosion by high purity water and caustic corrosion. Its outstanding properties makes it useful for furnace components, chemical and food processing, nuclear engineering and sparking electrodes.

Inconel 602 Washers

Inconel alloy 602 is a high carbon Nickel chromium iron alloy with addition of micro alloying elements titanium and aluminium together with lithium and zirconium. It is supplied in solution annealed condition with an oxidized and descaled surface.

Inconel 603 Washers

It covers Inconel 603 Forging. These are classified into different grades according to chemical composition. A chemical analysis shall be employed on each alloy in order to determine its chemical composition. Grain size and mechanical properties like tensile strength, yield strength and elongation shall be measured. A tension test and ultrasonic tests shall be done for each specimen. Values given in Inch-Pound shall be regarded as standard. The values given in parenthesis are mathematical conversions to SI units that are provided for information only.

Inconel 6035 Washers

It covers Inconel 6035 Forging. These are classified into different grades according to chemical composition. A chemical analysis shall be employed on each alloy in order to determine its chemical composition. Grain size and mechanical properties like tensile strength, yield strength and elongation shall be measured. A tension test and ultrasonic tests shall be done for each specimen. Values given in Inch-Pound shall be regarded as standard. The values given in parenthesis are mathematical conversions to SI units that are provided for information only.

Inconel 617 Washers

Inconel Alloy 617 is a Nickel chromium cobalt molybdenum alloy with an exceptional combination of metallurgical stability, strength and oxidation resistance at high temperatures. Resistance to oxidation is provided by an aluminium addition. The alloy also resists a wide range of corrosive aqueous environments and thus used in gas turbines for combustion cans, ducting and transition liners, petrochemical processing, heat treating and equipment and in nitric acid production.

Inconel 624 Washers

It covers Inconel 624 Forging. These are classified into different grades according to chemical composition. A chemical analysis shall be employed on each alloy in order to determine its chemical composition. Grain size and mechanical properties like tensile strength, yield strength and elongation shall be measured. A tension test and ultrasonic tests shall be done for each specimen. Values given in Inch-Pound shall be regarded as standard. The values given in parenthesis are mathematical conversions to SI units that are provided for information only.

Inconel 625 Washers

Inconel Alloy 625 is a Nickel chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy’s matrix and which provides better strength without a strengthening heat treatment. Alloy resists a wide range of extreme corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactors.

Inconel 629 Washers

It covers Inconel 629 Forging. These are classified into different grades according to chemical composition. A chemical analysis shall be employed on each alloy in order to determine its chemical composition. Grain size and mechanical properties like tensile strength, yield strength and elongation shall be measured. A tension test and ultrasonic tests shall be done for each specimen. Values given in Inch-Pound shall be regarded as standard. The values given in parenthesis are mathematical conversions to SI units that are provided for information only.

Inconel 686 Washers

Inconel Alloy 686 is an alloy designed for exceptional corrosion resistance in a wide range of extreme environments. The alloy is used in the most extreme environments experienced in chemical processing. Widely used in Pollution control, pulp and paper production and treatment of industrial and municipal wastes. Chemical processing uses include heat exchangers, reaction vessels, evaporates and transfer piping. Air pollution control applications are stack liners, ducts dampers, scrubbers, stack-gas preheaters, fans and housings.

Inconel 690 Washers

Inconel alloy 690 is a high chromium Inconel with excellent resistance to many corrosive aqueous media and high temperature atmosphere. Its high chromium content gives it excellent resistance to aqueous corrosion by oxidising acids (especially nitric acid) and salts and to sulphidation at high temperatures. In addition to its corrosion resistance, Alloy 690 has high strength, good metallurgical stability and favourable fabrication characteristics.

Inconel 718 Washers

Inconel 718 is a precipitation harden able Nickel chromium alloy with significant amount of iron niobium molybdenum with lesser amount of titanium and aluminium. It has corrosion resistance and high strength with very good weld ability including resistance to post weld cracking. it has good creep rupture strength at 1300 Degrees Fahrenheit. Mostly used in gas turbines, rocket motors, spacecraft’s, nuclear reactors, pumps and toolings.

Incoloy 800 Washers

Inconel 800 is A Nickel chromium alloy with good strength and better resistance to oxidation and carburisation in high temperature environments. It resists corrosion by many aqueous environments. Alloy has a stable, austenitic structure during prolonged exposure to higher temperatures. Mostly used for process piping, heat exchangers, carburizing equipment, heating element sheathing and nuclear steam-generator tubing.

Incoloy 800h Washers

It covers Incoloy 800h Forging. These are classified into different grades according to chemical composition. A chemical analysis shall be employed on each alloy in order to determine its chemical composition. Grain size and mechanical properties like tensile strength, yield strength and elongation shall be measured. A tension test and ultrasonic tests shall be done for each specimen. Values given in Inch-Pound shall be regarded as standard. The values given in parenthesis are mathematical conversions to SI units that are provided for information only.

Inconel 800HT Washers

Inconel 800HT is a Nickel iron chromium alloy that have the same composition as Inconel 800 but has higher creep rupture strength. Its strength comes from close control of the carbon aluminium and titanium contents in conjunction with a high temperature anneal. used in chemical and petrochemical processing , power plants for super heater , preheater tubing and Industrial furnaces and heat treating equipment.