What material grade does Sa 182 F51 Square Nuts use?

Sa 182 F51 Square Nuts are manufactured per the applicable ASTM, ASME, DIN, or ISO specification for the material grade. TorqBolt provides material test certificates (MTC) per EN 10204 3.1 or 3.2 with every supply.

What sizes are available for Sa 182 F51 Square Nuts?

TorqBolt manufactures Sa 182 F51 Square Nuts in metric sizes M6 to M100 and imperial sizes 1/4" to 4" diameter, with custom lengths from 10mm to 3000mm. Non-standard sizes are available on request.

Are Sa 182 F51 Square Nuts NACE MR0175 / ISO 15156 certified?

Yes, Sa 182 F51 Square Nuts can be supplied with NACE MR0175 / ISO 15156-2/3 sour service certification when specified at order. Material certificates and test reports are provided.

What is the typical delivery time for Sa 182 F51 Square Nuts?

Standard stock items ship in 1-2 weeks. Custom manufactured Sa 182 F51 Square Nuts typically ship in 4-6 weeks depending on quantity, material availability, and certification requirements.

Do you provide third-party inspection for Sa 182 F51 Square Nuts?

Yes, third-party inspection by TUV, Lloyd's Register, BV, DNV, SGS, and Intertek is available upon request for Sa 182 F51 Square Nuts. Witness testing and stage inspections can be arranged.

Sa 182 F51 Square Nuts Manufacturer & Supplier

Sa 182 F51 Square Nuts Specification

The raw material of these fasteners is classified as Duplex Stainless Steel. Being a PED certified Fasteners Manufacturer by TUV Rheinland,our fasteners are accompanied with EN 10204 3.1/3.2 certification. SA 182 F51 Square Nuts are available in hot forged,cold forged and bar stock machined conditions depending upon the order quantity.

Sa 182 F51 Square Nuts Equivalent Designation

UNS Designation	British STD	Werkstoff No.	European STD	Swedish STD	Japanese STD	Forging
S31803	318S13	1.4470	X2CrNiMoN22-5-3	2377	SUS 329J3L	Sa 182 F51

Surface Treatments & Coatings

Electro Less Nickel Plating Nuts Electro Cadmium Plating Nuts Dacromet 320 500 Coating Nuts Pickled Passivated Fasteners Nuts Silver Plating Nuts Nickel Plating Nuts Electro Zinc Cobalt Plating Nuts Electro Zinc Nickel Plating Nuts Ptfe Fluorocarbon Coating Nuts Aluminizing Nuts Ceramic Filled Fluorocarbon Coating Nuts

Related Products

Duplex 2205 Nuts Duplex 31803 Nuts Super Duplex 32750 Nuts Super Duplex 32760 Nuts Ferralium Nuts Ferralium 255 FG46 Nuts S32205 Nuts S31803 Nuts S32750 Nuts S32760 Nuts S32950 Nuts S32520 Nuts SA 182 F60 Nuts SA 182 F51 Nuts Duplex 2507 Nuts Zeron 100 Nuts Sa 182 F55 Nuts SA 182 F61 Nuts 12 Point Flange Bolt Allen Screw Anchor Bolts Carriage Bolts Custom Bolts Draw Bolts Elevator Bolts Eye Bolts Flange Bolts Hanger Bolts Heavy Hex Head Bolts Hex Head Bolts J Bolts Lag Bolts Machine Bolts Plow Bolts Shoulder Bolts Step Bolts Stove Bolts Stud Bolts Tap Bolts U Bolts Double End Stud Bolts Full Threaded Studs Bolts Half Threaded Studs Bolts Tap End Studs 12 Point Flange Nuts Acorn Nuts Cap Nuts Castle Nuts Coupling Nuts Doomed Nuts Flange Lock Nuts Flex Lock Nuts Heavy Hex Nuts Hex Nuts High Nuts Jam Nuts Kep Nuts Nuts Nylon Lock Nuts Serrated Flange Nuts Slotted Nuts Square Nuts T Nut T Nuts Wing Nuts Belleville Washers Bowed Spring Washers Conical Spring Washers Countersunk Washers Curved Spring Washers Dock Washers Dome Tooth Washers Dome Washers External Lock Washers Fender Washers Finger Spring Washers Flat Washers Hex Washers Hexagonal Washers Internal Lock Washers Lock Washers Ogee Washers Plain Washers Split Lock Washers Spring Washers Square Washers Tab Washers Tooth Lock Washers Torque Washers Wave Spring Washers

SA 182 F51 Square Nuts — Specifications & Dimensions

SA 182 F51 Square nuts are internally threaded fasteners that mate with bolts and studs to form clamped joints. TorqBolt manufactures SA 182 F51 Square nuts per ASME B18.2.2, ISO 4032/4033/4034, DIN 934/EN 24032, and DIN 6915 (heavy hex), in sizes M6–M100 and 1/4"–4".

Nut Height Categories

Standard / regular hex nut — ~0.875×D height, ASME B18.2.2 Type 1

Heavy hex nut — ~D height, full strength matched to bolt grade (A194 2H pattern)

Jam / thin nut — 0.5×D height, used as locknut against a primary nut

Coupling nut — long-form for joining two threaded rods

Cap / acorn nut — closed-end, decorative + thread protection

Locking Variants

For vibration-loaded joints, SA 182 F51 Square nuts are available as nyloc (polymer insert), all-metal prevailing-torque (DIN 980, distorted-thread style), flange-serrated (DIN 6923, integral washer face with anti-back-off teeth), and castle / slotted (DIN 935, cotter-pin retention). Each locking style trades reusability against prevailing-torque retention.

Thread & Mechanical

SA 182 F51 Square nut threads are gauged per ASME B1.1 / ISO 965 to Class 2B / 6H by default; high-strength variants use 3B / 4H6H. Proof-load testing per ASTM F606 verifies the nut can develop the bolt's full strength without thread strip; hardness range is controlled to prevent stress-corrosion susceptibility (HV 250–353 typical for high-grade nuts). Each lot is EN 10204 3.1 / 3.2 certified.

Special Patterns

TorqBolt also produces SA 182 F51 Square nuts in weld-nut, T-nut, square-nut, knurled thumb-nut, and rivet-nut patterns. NACE MR0175 / ISO 15156 sour-service certification available; NORSOK M-650 qualified mills supplying high-temperature service grades.

Duplex & Super Duplex Stainless Steels

Duplex stainless steels have a roughly 50/50 ferrite-austenite microstructure, doubling the yield strength of austenitic 304/316 grades while improving chloride pitting + stress-corrosion resistance. Duplex is the modern default for offshore platform fasteners, desalination plants, and sour-gas piping where austenitics fail to chloride SCC and martensitics fail to hydrogen embrittlement.

Duplex 2205 (UNS S32205 / S31803) is the standard grade with PREN ~35, suitable for chloride-bearing service to ~250°C. Super Duplex 2507 (S32750) and Zeron 100 (S32760) push PREN to 41-42 with higher Cr+Mo+N, qualifying for the most aggressive seawater + sour-well environments. SA-182 F51 / F53 / F55 / F60 are the ASME forged-flange equivalents.

Phase balance is critical: ferrite content must stay within 35-65% in weld + HAZ to maintain corrosion + impact properties (ASTM A923 testing). Solution anneal at 1040-1100°C followed by water quench locks the duplex microstructure. Fasteners ship per ASTM A276 / A479 with EN 10204 3.1 / 3.2 certs including ferrite count and Charpy impact at -46°C. NACE MR0175 / ISO 15156 sour-service certification is standard.

Sa 182 F51 Square Nuts