Aluminium 7075 Fasteners Specification
aluminium 7075 is an aluminium with zinc as a primary alloy element. Alloy 70751 exhibits an average machinability .This Alloy is renowned for good stress corrosion crack resistance.
aluminium 7075 is an aluminium with zinc as a primary alloy element. Alloy 70751 exhibits an average machinability .This Alloy is renowned for good stress corrosion crack resistance.
Chemical Properties | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Al | Cr | Cu | Fe | Mg | Mn | Zn | Si | Ti | Other each | Other Total |
87.1-91.4 | 0.18-0.28 | 1.2-2 | 0.5 max | 2.1-2.9 | 0.3 max | 5.1-6.1 | 0.4 max | 0.2 max | 0.05 max | 0.15 max |
Mechanical Properties | |||
---|---|---|---|
Yeild strength | Tensile strength | Elongation | Hardness |
Min 0.2% Mpa | Min Mpa | Min % | HRB |
103 | 228 | 16 | 60-80 |
Physical Properties | ||||
---|---|---|---|---|
Density | Elastic Modulus | Mean Coefficient of Thermal | Thermal Conductivity | Melting Point |
(Kg/m3) | (Gpa) | Expansion(?m/m/°C) | (W/m.K) | (n?.m) |
2.81 | 71.7 | 23.2 | 173 | 477-635 |
Cold Forged Fasteners, Hot Forged Fastener, C-Machined Components / Fasteners, CNC Machined Components / Fasteners, Custom Machined Components / Fasteners, Threaded Components / Fasteners, Non-Threaded Components / Fasteners, Bar Stock Machined Components / Fasteners.
Metric Range from M1.0 to M100 and Imperial Range from 1/16 inch to 4 inch.
Coarse, Fine, UNC, UNF, UN, BSW, Acme Threads with Half Thread, Full Thread & Double End Thread Configuration.
TorqBolt Inc. is india’s leading Aluminium 7075 Fasteners Suppliers, bolts stockist, bolts suppliers, bolts exporters and importer ,bolts dealers, stockholders, indentor, bolts manufacturers, retailers, wholesaler, bolts distributors, traders, specialized in delivering consignments on time by means of Express Courier Services DHL, FedEx, UPS, TNT, etc. to the remote locations. To find your location kindly select the list of countries and states:
Select Country : Select State: